|
Home > Products > Roughness Testers > Mahr Federal Pocket Surf IV Surface Profilometer Complete Package
One Year Warranty. Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory. Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging. Can be used to measure any one of four, switch-selectable, parameters: Ra , Rmax/Ry , Rz. Selectable traverse length 1, 3 or 5 cut-offs of 0.8 mm/.030 in. Operates in any position - horizontal, vertical, and upside down. Easy-to-read LCD readout presents the measured roughness value, in microinches or micrometers, within half a second after the surface is traversed. Out-of-range (high or low) and "battery low"signals are also displayed when situations happen. Four switchable probe positions - axial (folded) or at 90, 180 or 270 degrees. Even difficult-to-reach surfaces such as inside and outside diameters are accessible. Integrated data output for SPC-processing units that is compatible with the most common data processing systems. In excellent appearance and perfect working condition. A Complete Kit of: (2) Standard Probe (EGH-1019) (installed) (3) Reference Specimen (calibration standard, Ra = 2.95 μm) (4) Instruction Manual in English (5) Federal Carrying Case Technical Data Dimensions 140 mm x 76 mm x 25 mm/ 5.5 in x 3 in x 1 in Weight 435 g / 14 oz Measuring Ranges Ra 0.03 μm)m to 6.35 μm)m / 1 μm)in to 250 μm)in Ry 0.2 μm)m to 25.3 μm)m / 8 μm)in to 999 μm)in Rmax0.2 μm)m to 25.3 μm)m / 8 μm)in to 999 μm)in Rz 0,2 μm)m to 25.3 μm)m / 8 μm)in to 999 μm)in Display Resolution 0.01 μm)m / 1 μm)in Measurement Accuracy Meets ASME-B46.1, ISO, DIN standards and MIL specifications Digital Readout LCD; with; "Battery low" signal; "H" and "L" (measured values out-of-range) Probing and Traverse Lengths Traverse Evaluation Number of Cutoffs/ Parameters Length (Nominal) Length Switch Position Ra/Ry 2,0 mm/ .075 in 0,8 mm/ .030 in 1 3,5 mm/ .135 in 2,4 mm/ .090 in 3 Ra/Rz/Rmax 5,0 mm/ .195 in 4,0 mm/ .150 in 5 Traverse Speed 5,08 mm/ .2 in per second Cutoff 0,8 mm/ .030 in ASME 2 RC-filter Probe Type Piezoelectric Maximum Stylus Force 15,0 mN / 1500 mfg Power consumer-type alkaline battery, 9 Volt Battery Capacity Approx. 2500 measurements, depending on frequency of use and output option Operating Temperature 10 to 45 degree Celsius / 50 to 113 degree Fahrenheit Storage Temperature -20 to 65 degree Celsius / -4 to 149 degree Fahrenheit Picture |
)
)
)
)
)
)
)