Product search:

Mahr Federal PocketSurf III Surface Profilometer

Home
Product
Service
Distributor
About Us
Contact

Welcome to
Digiwork
Get better
Instruments

Thickness TestersThickness PartsHardness TestersHardness PartsFlaw DetectorsRoughness TestersRoughness PartsDigital Multimeters

Call 905-669-1663

 

Home > Products > Roughness Testers >

Mahr Federal PocketSurf III Surface Profilometer

Price: US $1599.00

Used with 3 month warranty.

Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory. Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging. Can be used to measure any one of four, switch-selectable, parameters: Ra , Rmax/Ry , Rz.

Selectable traverse length 1, 3 or 5 cut-offs of 0.8 mm/.030 in. Operates in any position horizontal, vertical, and upside down. Easy-to-read LCD readout presents the measured roughness value, in microinches or micrometers, within half a second after the surface is traversed. Out-of-range (high or low) and battery low signals are also displayed when situations happen.

Four switchable probe positions axial (folded) or at 90, 180 or 270, Even difficult-to-reach surfaces such as inside and outside diameters are accessible. Integrated data output for SPC-processing units that is compatible with the most common data processing systems.

Slightly Used in perfect working condition.

A Complete Kit of:

(1)Pocket Surf III Main Unit

(2)Standard Probe (EGH-1019)(installed)

(3)Reference Specimen (calibration standard, Ra =3.05 μm)

(4)9-volt Alkaline Battery (installed)

(5) Federal Carrying Case

Technical Data

Dimensions 140 mm x 76 mm x 25 mm/

5.5 in x 3 in x 1 in

Weight 435 g / 14 oz

Measuring Ranges Ra 0,03 m to 6,35 m / 1 in to 250 in

Ry 0,2 m to 25,3 m / 8 in to 999 in

Rmax0,2 m to 25,3 m / 8 in to 999 in

Rz 0,2 m to 25,3 m / 8 in to 999 in

Display Resolution 0,01 m / 1 in

Measurement Accuracy Meets ASME-B46.1, ISO, DIN standards and MIL specifications

Digital Readout LCD; with; "Battery low" signal; "H" and "L" (measured values out-of-range)

Probing and Traverse Lengths

Traverse Evaluation Number of Cutoffs/

Parameters Length (Nominal) Length Switch Position

Ra/Ry 2,0 mm/ .075 in 0,8 mm/ .030 in 1

3,5 mm/ .135 in 2,4 mm/ .090 in 3

Ra/Rz/Rmax 5,0 mm/ .195 in 4,0 mm/ .150 in 5

Traverse Speed 5,08 mm/ .2 in per second

Cutoff 0,8 mm/ .030 in ASME 2 RC-filter

Probe Type Piezoelectric

Maximum Stylus Force 15,0 mN / 1500 mfg

Power consumer-type alkaline battery, 9 Volt

Battery Capacity Approx. 2500 measurements, depending on frequency of use and output option

Operating Temperature 10 to 45C / 50 to 113 F

Storage Temperature -20 to 65C / -4 to 149 F

Picture

 

© 2016 Digiwork Instruments, All Rights Reserved.